はじめまして、こんにちはkouと申します。
今日から参加させていただきます。
どうぞよろしくお願いします。
KNOPPIXは自作機にHDDインストして
使用しています。
超初心者なので分からないことがたたあるんですが
さっそく教えていただきたいことがあります。
現在、Tekram のSCSIボード DC315/Uというのを
使用しているのですが認識させようとDebian3.0用の
ドライバーを入手しREAD.MEとにらめっこしているのですが
お手上げ状態です。
大変、申し訳ありませんがどなたかおたすけ願えません
でしょうかよろしくお願いします。
READ.MEつけたんですが長い文章でご迷惑おかけします。
現在 KNOPPIX3.2日本語版使用
Tekram DC315/U
Tekram SCSI adapters:
(AMD53C974) DC390(T)
(NCR53C8XX) DC310/DC310U/DC390W/DC390U/DC390F
DC390U2B/DC390U2W/DC390U2D
(TRM-S1040) DC395U/UW/F DC315/U
Debian 3.0 Linux
=================== Driver User's Guide
=======================
Linux SCSI driver technical support
mail address China: freeos@xxxxxxxxxxxxx
mail address Germany: garloff@xxxxxxx
The source drivers of DC390(T)
(AMD53C974)
DC395U/UW/F DC315/U
(TRM-S1040)
New version maintain by Kurt Garloff
<garloff@xxxxxxx>
http://www.garloff.de/kurt/linux/dc390/
http://www.garloff.de/kurt/linux/dc395/
ftp://ftp.suse.com/pub/people/garloff/linux/dc395/
=================================================================
1. Contents
readme.txt - (This file)The readme file for
DC390(T)
DC310/DC310U
DC390W/DC390U/DC390F
DC390U2B/DC390U2W/DC390U2D
DC395U/UW/F DC315/U
Linux driver
driver.zip - Debian 3.0 driver 1.44M diskette
image file (driver.img)
Source code included.
dc395x_trm.tar.gz - Source code for
DC395U/DC395UW/DC395F DC315/DC315U
SCSI adapters
files include
:dc395x_trm.c,dc395x_trm.h
2. Install a fresh system with a SCSI disk attached to
DC3X5
A. Before Installation - Under DOS/Windows environment
a. Unzip driver disk
X:\PATH\pkunzip.exe driver.zip =>> driver.img
Tips: You can download pkunzip.exe from
ftp://ftp.tekram.com.tw
b. Dump it into a floppy disk.
X:\PATH\rawrite.exe driver.img A:
B. Installation
1. Boot from CD-ROM
2. Type "bf24" at "boot:" prompt to start
installation with a 2.4 kernel.
3. When goes to "Preload essential modules from a
floppy"
4. Insert the driver disk into floppy
5. Answer "Yes" twice to proceed.
6. Select Module "dc395x_trm" at "Modules Selection"
screen.
7. No arguments needed to load the module.
8. Perform NORMAL installation procedures.
9. Don't forget to do a "Make System Bootable" to
install LILO to your SCSI HDD.
10.Installation finished and reboot.
3. Add DC3X5 support to your own kernel.
Note: We assume that your root dir of kernel source tree
is /usr/src/linux-2.4
A. Prepare installtion
a. Insert driver disk into drive a:, mount it to
directory. For example:
#mount /dev/fd0 /mnt/floppy
b. Copy file
#cp /mnt/floppy/src/*.*
/usr/src/linux-2.4/drivers/scsi/
B. Modify make and config files
In /usr/src/linux-2.4/drivers/scsi/Makefile
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ ......
@obj-$(CONFIG_SCSI_DC390T) +=tmscsim.o
@obj-$(CONFIG_SCSI_DC395x_TRMS1040)
+=dc395x_trm.o <----Insert this line
@obj-$(CONFIG_SCSI_AM53C974) += AM53C974.o
@ ......
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
In /usr/src/linux-2.4/drivers/scsi/Config.in
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ ......
@ dep_tristate 'Seagate ST-02 and Future Domain
TMC-8xx SCSI support' CONFIG_SCSI_SEAGATE $CONFIG_SCSI
@ if [ "$CONFIG_PCI" = "y" ]; then
@ dep_tristate 'Tekram DC395U/UW/F and DC315/U
SCSI support' <----Insert this line
@ CONFIG_SCSI_DC395x_TRMS1040 $CONFIG_SCSI
<----Insert this line
@ dep_tristate 'Tekram DC390(T) and
Am53/79C974 SCSI support' CONFIG_SCSI_DC390T $CONFIG_SCSI
@ if [ "$CONFIG_SCSI_DC390T" != "n" ]; then
@ bool ' _omit_ support for non-DC390
adapters' CONFIG_SCSI_DC390T_NOGENSUPP
@ fi
@ fi
@ ......
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
C. Make new kernel
# cd /usr/src/linux-2.4
# make mrproper
# make config
Tips: Say "M" means configure this driver as a module.
;When prompt for "SCSI support" say "Y" or "M".
;When prompt for "SCSI disk support" say "Y" or "M".
;When prompt for "SCSI tape support" say "Y" or "M".
;When prompt for "SCSI CD-ROM support" say "Y" or "M".
;When prompt for "SCSI generic support" say "Y" or
"M".
;When prompt for "SYM53C8XX SCSI support"
;say "Y" or "M"
;When prompt for "Tekram DC395/U/UW/F and DC315/U SCSI
support"
;say "Y" or "M".
;When prompt for "Tekram DC390(T) and Am53/79C974 SCSI
support"
;say "Y" or "M".
# make dep
# make clean
# make bzImage
# make modules
# make modules_install
# cp arch/i386/boot/bzImage /
# ( edit the lilo.conf file under path /etc as
follow...)
; Add an entry for "bzImage" in /etc/lilo.conf
; Example:
; ...
; # Linux bootable partition config begins
; image = /bzImage # <--- NEW
; root = /dev/sda1 # <--- NEW
; label = DC395x_trm # <--- NEW
; read-only # <--- NEW
; # Linux bootable partition config ends
; # Linux bootable partition config begins
; image = /vmlinuz
; root = /dev/sda1
; label = linux
; read-only
; # Linux bootable partition config ends
; ...
;
# lilo
# shutdown -r now ;reboot the system
...
...
boot: DC395x_trm ;when system Rebooting ...
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
$
$
$ ALL Tekram SCSI adapters features control by SCSI BIOS
$
$
$
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
|
