Vitruvian Penguin
knoppix

[knoppix:6311] Re: QTPartedで、HDDが見えない。

Date: Mon, 22 May 2006 12:04:23 +0900
X-mailer: Sylpheed version 2.2.4 (GTK+ 2.6.10; i686-pc-mingw32)
柘植です。

[knoppix:6309] Re: QTPartedで、HDDが見えない。
"Kazuaki Miyauchi" <miyauchk@xxxxxxxxx> wrote:

> 06/05/20 に Tsuge Akihide<buxus@xxxxxxxxxxxxxxxxx> さんは書きました:
> >V4.02 なら parted-bf(1.6.9-3.2) が入ってますから、
> >
> >  $ sudo parted /dev/hda print
> >
> > してみたらひょっとして /dev/hda のパーティションテーブルを表示してくれま
> > せん?
> 
>  してくれません。
> Warning: Unable to open /UNIONFS/dev/hda read-write (文字化け).
> /UNIONFS/dev/hda has been opened read-only.
> Error: Could not read geometry of /UNIONFS/dev/hda - 文字化け.
> となってしまいます。
> 
>  只、ここでの/dev/hdaってのは、KNOPPIXの入っているCDROMですよね。

違います。
私が`/dev/hda'って書いたのは、宮内さんが [knoppix:6299] で

> [root@toyoks /]# /sbin/fdisk -l /dev/hda
> 
> Disk /dev/hda: 40.0 GB, 40020664320 bytes
> 255 heads, 63 sectors/track, 4865 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
> 
>    Device Boot      Start         End      Blocks   Id  System
> /dev/hda1   *           1          13      104391   83  Linux
> /dev/hda2              14        2434    19446682+  8e  Linux LVM
> [root@toyoks /]#
> になります。この20Gしか使っていないLVMを40Gに拡張したいわけです。

っておっしゃってたからですよ。このときの hda は HDD ですよね。
もし違う環境で試すのなら、適宜デバイス名を変更してください。

-- 
Tsuge Akihide
<Prev in Thread] Current Thread [Next in Thread>